Available for new missions · France & worldwide

Independent inspection at your vendors.

Factual reports, blocking points flagged early, follow-up until release — in France and worldwide.

Third-party inspection, FAT/SAT witnessing and expediting for Oil & Gas, energy and marine projects.

Reply within 24 h (working days) Flash report on the evening of the visit ATEX qualification (INERIS)
Pump performance test bench witnessed by AVIAMEI
Pump performance test witnessed at the manufacturer — France, 2025
Services

Everything between the PO and the shipment.

We are your eyes at the vendor's shop: we check, we witness, we push — and we tell you exactly where your order stands.

Vendor inspection

Hold and witness points per your ITP.

  • Pre-inspection meeting
  • Visual & dimensional
  • Document review

FAT / SAT witnessing

Tests witnessed, readings recorded.

  • Performance & run tests
  • Hydro & pneumatic tests
  • Load & functional tests

Manufacturing surveillance

Quality followed at each stage.

  • Welding & NDT
  • Material traceability
  • Coating & final dossier

Expediting & release

Deliveries kept on schedule.

  • Progress follow-up
  • Packing & marking
  • Release notes (IRN)
Recent missions

What it looks like on the shop floor.

Three recent assignments. Details are summarised; reports remain the property of the client.

FPSO KAMINHO · TOTALENERGIES · 2026

Rescue boat davit FAT

Equipment
Rescue boat davit, winch and HPU — ACEBI, France
Witnessed
Static load test at list and trim, swing-out / swing-in on HPU and accumulators, wave compensation, padeye tests (LSA Code, MSC.81(70)).
Found
Test sheets not matching the approved (IFC) procedure, untraceable padeye SWL, 50 Hz vs 60 Hz supply discrepancy.
Outcome
Points raised and tracked in daily flash reports before release, not discovered at site.
HAIL & GHASHA · ADNOC · 2026

Sludge pump hydrostatic test

Equipment
Positive displacement sludge pumps — PCM
Witnessed
Hydrostatic test per API 676 and the project ITP, on behalf of Fulkrum for Saipem.
Outcome
Test witnessed and reported in the client's template, with readings, gauge calibration and photos.
BP GH LINGEN · GERMANY · 2026

Heat exchanger leak testing

Equipment
Heat exchangers — Kelvion
Witnessed
Helium leak test and hydrostatic test (EN 13445), on behalf of Worley.
Outcome
Inspection report issued with test parameters, results and supporting evidence.
On the shop floor

Real inspections, real equipment.

Photos from AVIAMEI missions, 2024–2026. No faces, nameplates or client documents shown.

Key figures

Track record, in numbers.

Figures at November 2026, from the founder’s CV and AVIAMEI mission records. Years include NDT and site quality control before 2019 and third-party inspection since 2019.

2019AVIAMEI founded
10+years of field inspection
100+FAT and test activities witnessed
40+manufacturers inspected
20+international projects
6inspection agencies worked for
47referenced assignments since 2019
5disciplines, 10 codes & standards
Method & commitments

From your email to the release note — with deadlines you can hold us to.

Send the scope

PO, ITP, vendor and location. Availability and a quote within 24 h of receipt (working days). NDA on request.

We prepare

Specification, procedure revision and instrument calibration checked before travelling.

We witness

Each finding states the requirement, the reading, the instrument and a photo. Flash report the evening of each inspection day.

You decide

Full report within 24 h after the visit (working days), in your template. Release note only once every hold point is closed.

References

Trusted on major projects worldwide.

End clients & EPCs

Operators and contractors whose equipment we inspected at the vendor, on behalf of an agency or the EPC:

ADNOCTotalEnergiesBPShellPetrobrasPDOTÜPRAŞAir LiquideAir ProductsSaipemTechnip EnergiesTécnicas ReunidasJESAWorley

Inspection agencies

Agencies that mandated AVIAMEI as their inspector:

DNVIntertekWorleyApplus+FulkrumIntersica

Full reference list, project by project

Client and project names are cited as professional references; detailed scopes are shared only with the client's authorization.

How to work with us

Directly, or through your inspection agency.

Same inspector, same rigour, same report quality. You choose the contract route that suits your project.

Direct — manufacturers, EPCs, end users

  • One point of contact: the inspector who does the work
  • Fast mobilisation in France, especially western France (Nantes, Saint-Nazaire, Angers)
  • Clear daily rate plus travel, quoted within 24 h (working days)

Through your agency — DNV, Intertek, Worley, Applus+ and others

  • Reports in the agency or client template, to its procedures
  • CV, qualifications and availability sent on request
  • Used to agency coordination: notifications, timesheets, flash reports
Engineer + pilot

Three cockpit habits, applied on the shop floor.

01

Checklists

Every ITP step checked against the procedure revision in force, before the test, not after.

02

Briefing and debriefing

Pre-inspection meeting to align everyone; flash report the evening of the visit.

03

Threat and error management

Open points tracked with an owner and a date until they are closed. No release with an open hold point.

About

An engineer's rigour, a pilot's discipline.

AVIAMEI was founded in 2019 by Mohamed El Harati, mechatronics design engineer (ENS Cachan, Energy) and First Officer on Boeing 737. Before 2019, he performed UT, PT and MT examinations in thermal and nuclear power plants and refineries.

In the cockpit as in the workshop, the same culture: checklists, anticipation and accountability. That is what you get on every inspection.

Mohamed EL HARATIFounder & lead inspector
  • Mechatronics design engineer — ENS Cachan (Energy)
  • ATEX qualification issued by INERIS
  • 10+ years of third-party inspection, AVIAMEI since 2019
  • First Officer, Boeing 737
  • FR · EN · AR · ES
Founder’s LinkedIn profile →
Company details & credentials →
FAQ

Questions buyers ask before booking.

How quickly can you mobilise?

Availability and a quote are sent within 24 h of your request (working days). Lead time on site depends on location, travel and visa requirements.

Do you work directly or only through agencies?

Both. Manufacturers, EPCs and end users can hire AVIAMEI directly; agencies can mandate AVIAMEI as their inspector.

In which format are reports issued?

In your template or the agency’s, otherwise in the AVIAMEI format: flash report the evening of the visit, full report within 24 h (working days).

Where do you operate?

Based near Angers, France. Missions in France, Europe and worldwide.

How are rates set?

A daily rate plus travel and expenses, confirmed in a written quote before the mission.

Is my information kept confidential?

Yes. Drawings, prices and findings are used only for the mission. An NDA can be signed before any document is shared.

Contact

Request availability

Tell us what, where and when. Within 24 hours you receive: availability for your date, a daily rate, a travel estimate and the proposed inspection scope.

Your request goes straight to [email protected]. You get a confirmation on screen, and an answer within 24 h (working days).

Confidential: your data is used only to answer your request. NDA available before any document exchange.

Get a quote